You are here: » Digitaltvcumbria - archive section  » Freeview  » Countywide  » should be in area.. but breaking up signal...
Pages: [1]   Go Down
« previous next »
Send this topicPrint
Author Topic: should be in area.. but breaking up signal...  (Read 1823 times)
jof1
Newbie
*
Posts: 3
« on: February 05, 2006, 11:12:59 AM »
Iíve been told Iím in the coverage area for Freeview but having installed my Freeview box a number of channels seem to be missing and others are breaking up what can I do to cure this?
Report to moderator   Logged
Analoguesat
Full Member
***
Posts: 145
« Reply #1 on: February 05, 2006, 06:25:26 PM »
Your aerial system probably needs upgrading.
Report to moderator   Logged
hunnymonster
Jr. Member
**
Posts: 75
« Reply #2 on: February 05, 2006, 09:11:27 PM »
Give us a clue jof1 - where are you (town is close enough)....

As Analoguesat says though - it's probable that your existing aerial is either too small (digital is broadcast at a much much lower level than analogue) or of the wrong 'grouping' to pick up the digital signal, possibly combined with an old downlead that's weathered, and made up of single-screened cable, when it really should be double-screened 'satellite grade' cable.
Report to moderator   Logged
Pages: [1]   Go Up
Send this topicPrint
« previous next »
Jump to: